background image

10

AW10-LSUB-BR Installation Manual

 Type:

 Full Bandpass Subwoofer

 Woofer: 

10” (254mm) PP Weatherproof Cone 

                                             (rubber surround)

 Impedance:

 8Ω - 70/100V 

 Frequency  Response:

 30Hz - 200Hz

 SPL:

 90 dB @1w/1m

 Dimensions: 

Woofer Enclosure: 12.7“ dia x 18.3”L  (32.3 x 46.5cm)  

                                             Canopy: 10.8” dia (27.4)

 Weight:

 29 lbs (13.1 kg)

The Russound AW10-LSUB-BR Speaker is guaranteed against all defects in materials and 

workmanship for five (5) years from the date of purchase. During this period, Russound 

will replace any defective parts and correct any defect in workmanship without charge 

for either parts or labor.
For this warranty to apply, the unit must be installed and used according to its written 

instructions. If service is necessary, it must be performed by Russound. The unit must 

be returned to Russound at the owner’s expense and with prior written permission. 

Accidental damage and shipping damage are not considered defects, nor is damage 

resulting from abuse or from servicing by an agency or person not specifically authorized 

in writing by Russound.
This Warranty does not cover:

•  Damage caused by abuse, accident, misuse, negligence, or improper installation or 

operation

•  Power surges and lightning strikes
•  Normal wear and maintenance
•  Products that have been altered or modified
•  Any product whose identifying number, decal, serial number, etc. has been altered, 

defaced or removed.

Russound sells products only through authorized Dealers and Distributors to ensure that 

customers obtain proper support and service. Any Russound product purchased from 

an unauthorized dealer or other source, including retailers, mail order sellers and online 

sellers will not be honored or serviced under existing Russound warranty policy. Any sale 

of products by an unauthorized source or other manner not authorized by Russound 

shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids 

the warranty on those parts. In these cases, repairs will be made on the basis of the retail 

value of the parts and labor. To return for repairs, the unit must be shipped to Russound 

at the owner’s expense, along with a note explaining the nature of service required. Be 

sure to pack the unit in a corrugated container with at least three (3) inches of resilient 

material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return 

Authorization number. Write this number on the shipping label and ship to:

Russound

ATTN: Service
1 Forbes Road
Newmarket, NH 03857

Due to continual efforts to improve product quality as new technology and techniques 

become available, Russound/FMP, Inc. reserves the right to revise system specifications 

without notice.

Speaker care

These sealed construction speakers are made of durable materials that need 

very little care. Occasionally wipe them with a soft, damp cloth. Do not use any 

harsh detergents, chemical solvents, or abrasive materials on your speakers, 

and do not spray water or other liquids into the grilles.

WARRANTY

TECHNICAL SPECIFICATIONS 

Summary of Contents for AW10-LSUB-BR













Reviews: