4
12 Don’t use the cleaner if the bin is full – switch off, unplug, empty.
13 Don’t use the cleaner for any purpose other than those described in these
instructions.
14 Don’t use tools or attachments other than those we provide.
15 Don’t leave the cleaner in direct sunlight.
16 Don’t use the cleaner if it’s damaged or malfunctions.
17 If the cable or plug is damaged, return the cleaner, to avoid hazard (back page).
household use only
U
BEFORE USING FOR THE FIRST TIME
Remove all packaging from the cleaner, and count the bits. The box should contain the
cleaner, complete with hose, the handle, and combined crevice tool and small brush.
Check that you’ve got them all before you dispose of the packaging.
C
FIT THE HANDLE
1 Fit the end of the handle into the hole on top of the cleaner, then push the handle
down till the handle lock engages with the catch on the handle.
C
FIT THE HOSE
2 Bring the hose up and over the hose rest, then push the hose end into the base tube,
at the side of the cleaner.
3 You’ll hear the hose release click into place to secure it.
4 In this position, the hose applies suction to the base of the cleaner.
C
STORE THE CABLE
5 Turn the top cable hook till it points up.
6 Wind the cable between the top and bottom cable hooks.
C
SET THE FLOOR TYPE
7 Tilt the handle back, to raise the cleaner slightly from the floor, to make moving the
brush height control easier.
8 Set the brush height control to suit the floor covering:
a) Slide it to
4
for short pile carpet, and for hard floors like vinyl, stone, or
parquet.
b) Slide it to
3
for long pile carpet.
c) Use the two stops marked
•
for medium pile carpet.
,
Use the long pile setting when using the handle and tools, to prevent the brush
continually hitting the surface the cleaner is sitting on.
C
PLUG IN
9 Check that the switch is off (press
0
).
10 Turn the top cable hook down, to release the cable from the rear of the cleaner.
11 Put the plug into a socket near the area to be cleaned (switch the socket on, if it’s
switchable).
12 You may pass the cable through the cable rest under the handle, to prevent it
dragging on the floor behind the cleaner.
