5
GENERAL USE
BEFORE FIRST USE
CAUTION: Handle blades carefully.
• Carefully remove all packaging material, any stickers and the plastic protector from
the power plug.
• As some parts may be packed separately, check to ensure all items have been
unpacked before disposing of the packaging.
• All parts need to be thoroughly cleaned before being used for the first time
( see 'Care and Maintenance').
• Remove and save instruction booklet.
BLENDING JAR ASSEMBLY
1. Turn blending jar upside down and place flat on counter top
or work surface.
2. Place the blade assembly (see FIG. A) in bottom opening of
the jar with blades down (see FIG. B).
CAUTION: Blades are sharp. Handle carefully.
3. Rotate clockwise until tight. It is important to tighten the
assembly to avoid leaking while blending.
4. Turn assembled jar right side up.
5. Place the lid on blender jar.
6. Place the plastic cap onto the ingredient slot and twist
clockwise to lock into position.
7. Uncoil power cord from storage area under the blender base.
8. Place the blending jar on blender base and rotate clockwise until locked into
position.
9. Blender is now ready for use.
USING THE BLENDER JAR
NOTE: Appliance should always have lid in place when in use.
1. Make sure appliance is OFF (O).
2. Place ingredients to be blended into jar. For best results, add ingredients in the
following order:
a. Liquids
b. Powders
c. Soft foods
d. Hard foods
e. Ice cubes last
Tip: When using frozen fruits it is not necessary to also add ice.
3. Place lid on jar; make sure the plastic cap is locked onto the ingredient slot.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods, such as
ice cubes or cheese, keep one hand on the lid to keep blender in place.
5. Turn the dial to the speed that best suits your desired task.
Summary of Contents for STUDIO RHCBL500
Page 9: ...9 Notes...
