2
ABOUT YOUR SEAL FRESH VACUUM CANISTERS
1.
Place the items to be vacuumed sealed into the canister and leave at least 2.5cm of space
between the food/items and the cover rim.
2.
Ensure the canister cover rim and canister gasket seal are completely clean.
3.
Place the canister lid on the canister
4.
Open the vacuum sealer unit lid and place the larger end of the hose (provided with the
canisters) into the air intake in the vacuum chamber area securely. Place the smaller end of
the hose into the hose port on the canister lid. Ensure the Seal/Open dial on canister lid is
turned to the Seal position.
CAUTION: If the sealing strip has been activated in the same vacuum sealing
session, do not touch, it becomes hot.
5.
Press the canister switch (just above the air intake) to start vacuuming. To ensure there is no
air leaking between the cover and the canister, at the beginning of the vacuuming use your
hand to push the dial down. The vacuuming will stop automatically when enough vacuum
pressure is achieved.
6.
Hold the canister lid down securely when you pull out the end of the hose. Ensure you hold
the dial in the seal position then rotate the end of the hose counter-clockwise while lifting it
out of the lid.
7.
Your canister can be stored in the pantry, fridge and freezer, depending on the items
packaged.
OpENINg THE CANISTER AFTER VACUUM pACkAgINg
1.
In order to open the canister, you need to release the air first by turning the Seal/Open dial
clockwise from Seal to Open.
2.
Now that the air is released, simply pull off the lid.
CARE AND CLEANINg
1.
Canister bases (not lids) are top rack dishwasher safe. Alternatively wash the canister bases
in warm water with a mild dishwashing soap.
2.
Canister lids can be wiped down with a damp cloth. Do not immerse in water.
3.
Wash the canister hose in warm water with a mild dishwashing soap.
4.
Ensure the accessories are dried thoroughly before re-using.
5.
Canisters are freezer safe.
TROUBLE SHOOTINg
The canister will not vacuum:
1.
Make sure the hose adaptor is firmly connected both to the appliance and the canister.
2.
Check if the knob of the canister to ensure it is set to the Seal position.
3.
Check if there is any damage or cracks in the canister or lid, if yes, change it for a new one.
4.
Check the function of the vacuum sealer.
5.
Make sure the rim of the canister is clean.
If all the above situations are excluded, please contact customer service.
RUSSELL HOBBS and logo are Trade Marks of Spectrum Brands, Inc., or one of its subsidiaries.
©2013 Spectrum Brands, Inc.
www.russellhobbs.com.au
www.russellhobbs.co.nz
