Lock & Keys (selected models)
•
Some models are provided with a lock and 2 keys. The lock will be on the
front of the unit/door at the bottom. The keys are packaged with the
instruction manual inside the appliance.
•
To lock the appliance insert 1 of the keys into the lock and turn it clockwise
until the metal pin is fully engaged and the door is locked. Remove the key
and place it in a secure place.
•
To unlock the appliance insert 1 of the keys in to the lock and turn the key
counter clockwise until the metal pin is fully released and the door is
unlocked. Remove the key and place it in a secure place.
•
If the locking pin catches the sides of the locking plate hole at the bottom of
the unit when the door is locked. You will need to adjust the fitting of the
locking plate and bottom hinge. To do this loosen the screws holding the
locking plate and bottom hinge in place, adjust the locking plate and bottom
hinge making sure the locking pin locates centrally in the locking plate hole.
Retighten the screws and check the door opens and shuts correctly.
Door Reversal
You will need to tilt the fridge backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the fridge flat on its side.
Tools Required: Philip head screwdriver, flat headed screwdriver and hexagonal
spanner.
1. Remove the top plastic hinge cover and set aside, then unscrew the two screws
from the metal bracket and set aside.
10
