4
To ensure that any residues left over from the manufacturing process are removed you’ll need to operate your
toaster without any bread in it. Start by turning the browning control to the highest setting (6), press the loading
lever down fully and wait for the toasting cycle to complete. Ensure the room is well ventilated as this process
may give off a smell which is normal.
Toasting bread
1.
Position the toaster and the power cord on a flat, even and stable heat resistant surface.
2.
Do not position the appliance near anything flammable.
3.
Plug the power cord into the wall socket.
4.
Place bread slices into the toasting slots (maximum thickness of bread 25mm).
5.
Turn the browning control to the desired setting (1 = light, 6 = dark)
6.
Press the loading lever down fully. The lever will only lock down into place if the main power supply at
the wall socket is switched on.
7.
When it reaches the “0” setting, the toast will pop up and the heating elements inside the toaster will
automatically turn off.
Note: Do not attempt to toast buttered bread or sandwiches in this toaster.
Cancel
To stop the toaster before the toasting cycle is complete you can press the cancel button. The toast will pop up
and the heating elements will turn off automatically.
Defrost
This feature enables you to toast frozen bread.
1.
Leave the browning control at your preferred setting (1 = light, 6 = dark).
2.
Put the frozen bread into the slots.
3.
Press the loading lever down fully until it locks down into place.
4.
Press the defrost button which will light up to indicate that it is switched on.
5.
Your toaster will extend the toasting time to allow the bread to defrost.
6.
When it reaches the “0” setting, the toast will pop up and the heating elements inside the toaster will
automatically turn off.
Reheat
The reheat button allows you to warm your toast without further browning or burning it.
1.
Reduce the browning control to a lower heat setting (1 = light, 6 = dark).
2.
Put the toast into the slots.
3.
Press the loading lever down fully until it locks down into place.
4.
Press the reheat button which will light up to indicate that it is switched on.
5.
When it reaches the “0” setting, the heated toast will pop up and the heating elements inside the toaster
will automatically turn off.
Bun warmer
The bun warmer is a retractable rack which enables you to warm buns or croissants.
1.
Turn the side knob to raise the bun warmer rack.
2.
Set the browning control to a highest setting “6” (1 = light, 6 = dark).
3.
Place the bun or croissant on the rack.
4.
Press the loading lever down fully until it locks down into place
5.
Don’t touch the bun warmer rack as it heats up very quickly.
6.
When it reaches the “0” setting, remove the bun or croissant.
7.
Retract the bun warmer rack once it has cooled.