Russell Hobbs RHOD20 Instructions And Warranty Download Page 10

 

10 

 

 

PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE 

IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. 

 

W A R R A N T Y 

 

1.

 

Home of Living Brands (Pty) Limited warrants to the original purchaser of this product (“the customer”) 
that  this  product  will  be  free  of  defects  in  quality  and  workmanship  which  under  normal  personal, 
family or household use and purpose may manifest within a period of 1 (one) year from the date of 
purchase (“warranty period”).  

2.

 

Where the customer has purchased a product and it breaks, is defective or does not work properly for 
the  intended  purpose,  the customer  must  notify  the supplier  from  whom  the  customer  bought  the 
product (“the supplier”) thereof within the warranty period. Any claim in terms of this warranty must 
be supported by a proof of purchase.  If proof of purchase is not available, then repair, and/or service 
charges may be payable by the customer to the supplier.   

3.

 

The faulty product must be taken to the supplier's service centre to exercise the warranty. 

4.

 

The supplier will refund, repair or exchange the product in terms of this warranty subject to legislative 

requirements.  This  warranty  shall  be  valid  only  where  the  customer  has  not  broken  the  product 
himself, or used the product for something that it is not supposed to be used for. The warranty does 

not  include  and  will  not  be  construed  to  cover  products  damaged  as  a  result  of  disaster,  misuse, 

tamper, abuse or any unauthorised modification or repair of the product.  

5.

 

This warranty will extend only to the product provided at the date of the purchase and not to any 

expendables attached or installed by the customer. 

6.

 

If the customer requests that the supplier repairs the product and the product breaks or fails to work 

properly within 3 (three) months of the repair and not as a result of misuse, tampering or modification 
by or on behalf of the customer, then the supplier may replace the product or pay a refund to the 

customer.  

7.

 

The customer may be responsible for certain costs where products returned are not in the original 

packaging, or if the packaging is damaged. This will be deducted from any refund paid to the customer. 

 

HOME OF LIVING BRANDS (PTY) LTD (JOHANNESBURG) 

 

JOHANNESBURG   

 

 

 

 

TEL NO. (011) 490-9600 

      CAPE  TOWN  

 

 

 

 

       TEL NO. (021) 552-5161 

DURBAN  

 

 

 

 

 

TEL NO. (031) 792-6000 

 

www.russellhobbs.co.za

 

 

 

Summary of Contents for RHOD20











Reviews: