•
Fit the bowl and splash guard cover to the Bench Mixer. The Bench Mixer drive operates
when the motor is running.
USING THE JUG
CAUTION: The cutting blades are very sharp. Handle the Blender with extreme care and
caution.
•
Press the blender drive cover release to open the cover and expose the drive for the jug.
•
Align the jug so the spout points along the head of the Bench Mixer.
•
Lower the jug onto the drive.
•
Push the handle towards the rear of the Bench Mixer to turn the jug anti-clockwise and lock
it into place.
FILLING THE JUG
NOTE: Do not use the jug without fitting the lid.
•
Place the ingredients into the jug.
•
Do not fill past the
MAX mark (1.4 litres) as the contents may force their way past the lid
when you start the motor.
•
Fit the lid on the jug and press it down fully to secure it.
POWER UP
CAUTION: - If the speed control is not set to ‘0’ (off position) the Bench Mixer will start
when the power supply is connected. If attachments or accessories are not fitted correctly
you may damage the machine.
•
Check that the speed control is set to '
0'.
•
Put the plug into the wall power outlet and switch it on.
SPEED CONTROL
•
Turn the speed control clockwise to the speed you want.
•
Turning the speed control anti-clockwise to ‘
P’ will give you a pulse at high speed.
•
Turn the speed control back to '
0' to turn the motor off.
CAUTION: Do not run the motor continuously for more than 10 minutes, it may overheat.
After 10 minutes, switch off for at least 10 minutes to let the motor cool.
PULSE FUNCTION (‘P’)
•
Turning the speed control anti-clockwise to ‘
P’ will give you a short burst at high speed.
•
Use ‘
P’ as a “pulse” function, for greater control over the mixing process.
ADDING INGREDIENTS
If you need to add ingredients after you have started blending:
•
Turn the speed control to '
0' (off position).
•
Wait till the blades stop moving.
•
Remove the lid.
•
Add the ingredients.
•
Replace the lid.
•
Start the motor.
CAUTION: Check that the added ingredients do not push the volume over the MAX mark.
RHMP1200BL_IB_RB2_111111.indd 10
14/11/11 4:29 PM
