4
comply with the above mentioned pre-cautions and instructions, could affect the safe
operation of this machine.
25. Do not use this appliance if the centrifuge is damaged.
PARTS DIAGRAM
ASSEMBLY OF THE UNIT
1. Place motor unit on a flat and even surface, with the On/Off switch facing forward.
Press the motor down firmly so that the suction cups on the feet of the unit get a
good grip.
2. Place the pulp holder on the holder on the left hand side of the unit. For easy
cleaning, you can place a plastic bag into the pulp holder, and fold the bag over the
sides of the holder.
3. Place the centrifuge base onto the motor unit so that the discharge lip holds the pulp
bin down.
4. Carefully place he centrifuge with ribs into the base so that the inner wheel fits into
the outer wheel and press down gently until the centrifuge clips into place. Carefully
turn the centrifuge and check that it turns smoothly.
NOTE: THE CENTRIFUGE
WITH RIBS IS VERY SHARP, HANDLE IT VERY CAREFULLY.
5. Position the lid onto the unit with the fill nozzle over the centrifuge. Press down firmly
until the lid clips into place.
6. Pull the clamp over the lid and snap it into place on either side of the unit.
7. Place a container underneath the juice outflow pipe. The unit is now ready for use.
