•
Wipe the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. Once
done, buff the soleplate with a clean dry cloth.
•
If fiber has adhered/ stuck to the soleplate, use a damp cloth with vinegar to wipe
the fiber from the soleplate.
•
If scale has blocked a steam hole, please remove it gently using a toothpick. Be
careful not to damage the surface of the soleplate
•
The body of the appliance should be cleaned with a damp cloth. Do not let water
enter the appliance and cause damage to any electrical components.
•
Do not use bleach or other abrasive substance or solvents to clean your appliance
as it can be damaging to the finish.
•
Do not immerse the appliance in water or any other liquid, or hold it under a running
tap to clean.
Note:
Never use sharp or rough objects to remove deposits from the soleplate. Never
use any abrasive or descaling agents to clean the iron.
STORING THE APPLIANCE
•
Complete Cleaning and Maintenance as instructed above.
•
Ensure that the steam knob is set to the
“0”/ “no steam”/ “OFF”
position.
•
Ensure that all parts are dry before storing.
•
Store only once the iron has cooled completely.
•
Store the appliance vertically in its box or in a clean, dry place.
•
Never store the appliance while it is still wet or dirty.
•
Never wrap the power cord around the appliance.
TROUBLE-SHOOTING
Problem
Possible Reasons
Solution
Not enough heat or too
much heat
The temperature dial may have
been rotated improperly.
The temperature dial may have
Set the temperature dial
to the correct position and
check if the iron is