Note:
It may be necessary to press the burst of steam button few times to start this
function.
During the use of ‘Burst of Steam’, stop ironing when the pilot light turns on and
then start ironing again only after the pilot light has turned off.
Warning:
Do not apply steam on any clothes or fabrics that are being worn by human or
pets. The temperature of the steam is very high and will burn or scald.
CORDED IRONING
1. Set the 3-position switch to (3) position
2. Take the iron (with power unit) from the stand for ironing
3. Replace the iron (with power unit )on the stand after using and set the 3-position switch
to (2) position for storage
。
CORDLESS IRONING
1. Set the 3-position switch to (1)position.
2. Take the iron (without power unit)from the stand.
3. Always replace the iron on the stand during ironing intervals.
4. When the iron is correctly placed on the stand, the pilot light (F)will illuminate.
5. If the soleplate needs heating up to the set temperature, the pilot light(F)will also be
activated. As soon as the soleplate has regained the set temperature, this light will cut
out.
6. We advise you to use the iron in the corded position if you intend to steam iron for a
length of time and when you apply numerous shots of steam, as this can cause the
soleplate to cool down considerably.
