4
24. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
25. In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this machine.
PARTS DIAGRAM
Base Assembly
1. Unscrew the Ring and
Base Locking Screw from the Pole
2. Insert the Pole through the hole in
the centre of the Stand Base and
twist into position.
3. Turn the Base upside down with the
Pole facing the floor and
place the Base Weight Support on the
bottom of the Stand Base. Tighten the
Base Weight Support to the Stand
Base using the Ring and Base Locking
Screw.
Fan Head Assembly
Unscrew the Locking Nut from the
Fan Head.
Put the Fan Head into the Pole,
and use the Clamp Screw to tighten the
Fan Head and the Pole
