4
SPEED & HEAT SWITCHES
SPEED
HEAT
O = Off
I = Cold
I
= Low
II = Warm
II
=
High
III = Hot
SWITCH (C) (COOL)
Speed I + Heat I + Cool = GENTLE AIR
Speed II + Heat I + Cool = STRONG AIR
OPERATING YOUR HAIRDRYER
SPEED & HEAT SWITCHES
Ensure the control setting is in the “0” position when the hairdryer is plugged into the
mains. Select the required speed and heat setting (as described in table).
GENERAL
Wash and condition your hair as desired, then ‘rough-dry’ your hair. Add mousse or light
setting agents evenly through the hair for hair protection and a long lasting style. If
desired attach the concentrator nozzle. Start styling your hair at the back and work
forwards. After using the attachment allow it to cool first before removing it from the
hairdryer.
CONCENTRATOR /STYLING NOZZLE
The nozzle concentrates air flow on to a small area of air for fast easy styling. It is ideal
for blow drying with a comb or styling brush. Divide your hair into small sections and
point the dryer along the hair shafts from the roots to the ends, to give a smooth
professional finish to the hair.
COOL SHOT
Use the cool shot setting for approximately 15 seconds after drying a section of hair, to
set the style.
CLEANING AND MAINTENANCE
•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
•
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the controls are set to “0”.
•
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.