15
2. Turn the control dial to adjust the defrost cycle time to 5 minutes.
3. Press MICROWAVE once.
4. Now turn the control dial to choose 80% microwave power. P80 will show on the LCD
display.
5. Press START/ +30SEC/ CONFIRM to confirm this selection.
6. Turn the control dial to adjust the cooking cycle time to 7 minutes.
7. Finish your multi-stage selection by pressing the START/ +30SEC/ CONFIRM button to
start cooking.
PRESET
(DELAY
START)
FUNCTION
1. Ensure that you have set the digital clock first. (
Check ―Setting the Digital Clock‖)
2. Start by inputting the desired cooking program. Remember that two multi-stages can be
selected at most. Note that defrosting should not be set in the preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
3. Press MICROWAVE once.
4. Turn the control dial to choose 80% microwave power. P80 will show on the display.
5. Press START/ +30SEC/ CONFIRM to confirm this selection.
6. Turn the control dial to adjust the cooking time to 7 minutes.
7. After completion of the above steps, please do not press START/ +30SEC/ CONFIRM
button. Proceed as follows:
Press CLOCK/ PRE-SET and the minute figure will flash on the display.
Turn the control dial to adjust the minute figure. The input time should be within 0
—59
minutes.
Now press the CLOCK/ PRE-SET button and the hour figure will flash.
Turn the control dial to adjust the hour figure. Here the input time should be between
0
—23 hours.
Press START/ +30SEC/ CONFIRM to finish this setting.
":"
will show.
The alert tone will ring twice when the cooking start time arrives and the cooking cycle
will start automatically.
Note: The digital clock must be set first. If it is not set, then the preset (delay start) function will
not work.
