Russell Hobbs RHEH1 Instruction Manual Download Page 3

Safety Instructions

 

Please comply with these instructions. If you do not, any damage resulting from 
improper, incorrect or negligent use or improper connection or installation is not 
covered by the manufacturer’s guarantee. 

Electric oven and hobs must be connected to an electrical cooker powerpoint - consult 
a qualified electrician. Products must be installed in accordance with the 
manufacturer's safety recommendations. 

This appliance must only be used for the purpose of heating or cooking food, any other 
use, for example heating rooms, working surface or storage surface is dangerous and 
will void the manufacturer’s guarantee. 

Additions or modifications to the appliance are not permitted. 

Do not place or store flammable liquids, highly inflammable materials or fusible objects 
on or near the appliance. 

Small children must be kept away from the appliance. 

The electrical safety of this hob is guaranteed only if it is connected to a properly 
earthed system, which complies with the electrical safety standards. 

Built-in appliances may only be used after they have been built in to suitable built-in 
units and work surfaces that meet the standards. 

Do not put pressure on the power supply cable while fitting the hob. 

Power supply cable length should not exceed 2m for isolation safety. 

In the event of faults with the appliance or damage to the glass ceramic (cracks, 
scratches or splits), the appliance must be switched off and disconnected from the 
electrical supply to prevent the possibility of an electric shock. 

Repairs to the appliance must only be carried out by authorised service personal. 

Make sure all the packaging has been removed before you use the appliance. 

Cables from electrical appliances must not touch the hot surface of the appliance or hot 
cookware. 

Never leave the appliance hob unattended when cooking with fat or oil. They can rapidly 
catch fire if overheated. 

Do not cut any food on the glass of the Vitroceramic hob. Glass panels should not be 
used as working surfaces. 

Be careful when using small household appliances, such as irons, near the elements. 

Do not use the cooking zones with empty cookware or without cookware. 

Make sure all the controls are in the off position when not in use. 

For cleaning, the appliance must be switched off and cooled down. 

For safety reasons, the cleaning of the appliance with steam jet or high pressure 
cleaning equipment is not permitted. 

For Customer Services & Spare Parts please call 

0845 208 8750 

Opening times: Monday - Friday  8am – 6pm & Saturday 9am – 1pm or visit us at 

www.productcareuk.com 

Summary of Contents for RHEH1
















Reviews: