Russell Hobbs RHEFSTV1002B User Manual Download Page 5

SAFETY INSTRUCTIONS

Warning: 

This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning use 
of the appliance by a person responsible for their safety. Children should be 
supervised to make sure that they do not play with the appliance. 

Warning: 

This heater is not equipped with a device to control the room 

temperature. Do not use this heater in small rooms when they are occupied by 
persons not capable of leaving the room on their own, unless constant supervision 
is provided.

Electrical Safety

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET

Before switching on, make sure that the voltage of your electricity supply is the 
same as that indicated on the rating plate. This product is designed to operate on 
220 

240V AC; 50Hz. Connection to any other power source may damage the unit.

This product may be fitted with a non re-wireable plug. If it is necessary to change 
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost 
or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or becomes 
damaged in any way, it should be cut off and an appropriate plug fitted. This should 
be carried out by a qualified electrician. The plug removed must be disposed of 
safely, as insertion into a 13 Amp socket is likely to cause an electrical hazard.

5

Summary of Contents for RHEFSTV1002B

















Reviews: