manualshive.com logo in svg

Russell Hobbs RHDH2002, Manual

Share
Download
Russell Hobbs RHDH2002 Manual Download Page 9

Continuous Dehumifier (Extraction) Mode

•

For maximum extraction rate, the Continuous Dehumidifier 
(Extraction) mode should be used. 

•

Press the Mode button on the control panel until the Continuous 
Dehumidifier indicator light is illuminated

•

The unit will continue to run at the maximum extraction rate until 
the water tank reaches the max fill level.

•

Press the Power button or Mode button to cancel the Continuous 
Dehumidifier (Extraction) mode

Note: 

The humidity cannot be set when the unit is operating in 

Continuous Dehumidifier (Extraction) Mode

SMD/Smart Dehumidifying (Extraction) Mode

•

In the SMART dehumidifying mode, the unit will automatically 
control room humidity in a comfortable range 45%~55% according 
to the room temperature.

•

Press the Mode button until the SMART indicator light is 
illuminated.

•

Press the Power button or Mode button to cancel the Smart 
Dehumidification (Extraction) Mode.

Note: 

The humidity cannot be set when the unit is operating  Smart 

Dehumidification (Extraction) Mode.

Dryer Mode

•

For maximum extraction rate when drying clothing, use the Dryer 
Mode.

•

The Dryer mode functions like the Continuous Extraction mode but 
with the additional boost of the Turbo Function. The humidity level 
is automatically controlled according to the actual room humidity. 
The unit will run in Drying mode for a maximum of 10 hours, or until 
the water tank is full.

USING YOUR DEHUMIDIFIER

Page 9

Summary of Contents for RHDH2002

























Reviews:

No comments

Brands by name

Popular brands

Load more brands