16
CLEANING AND CARE:
CLEANING THE FILTER
1.
Remove the dust container and rotate the lid anti clockwise so that the
arrow is pointing to the unlock symbol.
2.
Remove the dust container filter and get rid of excess dirt over a bin.
3.
Wash in warm water. Allow to dry for 24 hours before reinserting.
4.
Once the dust container lid and filter are removed, lift out the multi
cyclonic filter from the container. This comes apart further into 3 parts.
5.
To remove the bottom part, turn it anticlockwise and lift off.
6.
The middle part will lift off. Wash all parts including the container in
water and allow to thoroughly dry before reusing.
7.
To reassemble the multi cyclonic filter, lower the middle assembly onto
the base and align the ribs with the grooves so that it sits in place. Lower
the bottom assembly onto the middle assembly with the top assembly lip
facing upwards. Align the ribs with the grooves so that it sits in place and
turn clockwise to secure the assembly together.
Note
: The filter assembly fits back into the container with the rib of the
assembly slotting into the groove of the container (refer to diagram.)
Make sure the dust container filter is fitted back into the top of the
assembly with the lip facing downwards.
Reinsert the lid onto the container with the arrow pointing to the unlock
symbol. To secure, turn clockwise so the arrow points to the lock symbol.
5
1
2
7
6
3
4
Summary of Contents for RHCV20AS01
Page 22: ...22 NOTES...
Page 23: ...23 NOTES...
