For Customer Services & Spare Parts please call
0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at
7
Installation
After installation, do not switch the power to the freezer on for at least 3
hours – the unit needs to stand. The unit should be kept away from direct
sunlight. If the appliance is located on carpet, damage may be caused to the
carpet due to heat being emitted from the unit.
Remove all transport tapes and foam protection pieces . Clean the interior
of the freezer with a cloth dampened in lukewarm soap and water. Wipe
with clear water and wipe dry.
When the appliance has been positioned, adjust the two front feet to
ensure the unit is stable. This is essential to ensure quiet running and
proper door opening /closing. See below.
Once the appliance has been standing for 3 hours, plug in the freezer, locate
the thermostat knob inside the compartment and set to "3" position and
switch on the power. The compressor will begin to work. Close the door.
This Appliance is suitable to be placed in garages.
