19
MICROWAVE OVEN INSTALLATION
Built in under requirements
Important: No other methods of building under the microwave
are sanctioned by the manufacturer
•
The rear wall of the housing unit MUST be removed to allow
there to be the correct amount of ventilation
•
The ventilation gaps below the support shelf and below the
worktop must be adhered to.
•
An induction hob MUST NOT be fitted above the microwave.
•
It is not necessary to have a storage drawer fitted underneath
the microwave: this is shown purely as an example in the
drawing above.
Warning: the microwave will get hot during operation: care
should be taken not to accidentally come into contact with the
outer surface.
All measurements are in millimetres (mm)
