Russell Hobbs RH8CTD701, Instruction Manual, Page: 12 / 32

Connection to water drain;
1. Pull and take out the end of the hose at the back of the dryer. Do not use any tools
to take out the hose.
2. Fit one end of the water discharge hose, which is provided with the product, to the
slot from which you have removed the hose.
3. Fix the other end of the water discharge hose directly to the water outlet or sink.
The fitting must always be secured in all types of connections. Your house may be
flooded if the hose gets out of its housing during water discharge.
IMPORTANT:
•
The water discharge house must be installed at a height of 80cm maximum.
•
The water discharge hose must not be bent between the outlet and the product,
folded or stepped over.
•
You must be careful not the pinch or bend the hose.
Installation
12