Positioning
•
This appliance is to be installed in a counter top.
•
Avoid damaging the product during installation.
•
The appliance can only be used safely if it is correctly installed according to the
safety instructions. The installer is responsible for ensuring that the appliance
works correct when installed.
•
Electric ovens and hobs must be hard-wired to a suitably rated electrical
cooker power point
–
it is recommended that you consult a qualified
electrician. Failure to do so will invalidate your guarantee, liability claims and
could lead to criminal prosecution.
•
The edges of the hob must be a minimum of 60mm from a side or rear wall.
•
The highest point of the hob must be a minimum of 760mm from the underside
of any surface
directly
above it.
•
The highest point of the hob must be a minimum of 400mm from the underside
of any surface
either side
of the hob. If any surface
either side
of the hob is
lower than 400mm, then it must be at least 50mm from the outer edges of the
hob.
•
There must be a minimum of 50mm of clearance around the hob and any
combustible materials.
7
600mm
400mm
400mm
760mm
200mm
