Russell Hobbs RH55FF171-ML, Instruction Manual

Page: 9 / 28

9
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control
buttons located inside the fridge at the top of the cavity. Press the control
buttons to regulate the temperature inside the fridge.
Plug in the appliance, then on the temperature control, press the “SET” button
to adjust the temperature of the refrigerator. When you have adjusted the
temperature to the required setting leave for 3 seconds (do not press the set
button) and it will be selected and the indicator light will be lit.
The sequence of the temperature setting is below:
2 – 4 – 5 – 6 – 8 – FAST COOL – 2
“2” is the coldest setting and “8” is the warmest setting. The recommended
setting is setting “4”.
Once the temperature control has been set, close the door. We recommend that
the door is not opened for a minimum of 4 hours to allow the appliance to reach
the standard operating temperature.
Note: The standard operating temperature for the fridge compartment should
be between 0
º
C and 4
º
C and the standard operating temperature for the freezer
compartment should be between -18
°
C and -25
°
C.
Fast cool
This function should be used as a rapid cool/freeze setting and should only be
set 3 hours before a large amount of food is placed in the fridge. The
temperature control will automatically revert back to its previous setting. If
required then the temperature can be changed manually by pressing the “SET”
button.
Usage