For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at
www.productcareuk.com
24
Trouble Shooting
Fault
Possible cause
Removing methods
Your appliance does
not fill with water.
•
Water tap has been turned off.
•
Water inlet hose may be twisted.
•
Water inlet hose clogged.
•
Valve inlet filter clogged.
•
The machine door is not completely
closed.
•
Turn the faucet on.
•
Check water inlet hose and
untwist.
•
Clean water inlet hose filters.
•
Clean the valve inlet filters.
•
Close the machine door.
Excess foam has
formed in the
detergent draw.
•
Excessive amount of detergent used.
•
Wrong detergent used.
•
Press the Start/pause button.
To eliminate foam formation,
mix a tablespoon of softener
with 500ml of water and pour
the mixture in the detergent
drawer. After 5 – 10 minutes,
press the Start/pause button
again. For the next washing
operation, use the correct
amount of detergent.
•
Use detergents produced only
for automatic washing
machines.
Unsatisfactory
washing results.
•
The dirtiness of the laundry does not
match the programme select.
•
Insufficient amount of detergent used.
•
The washing machine is overloaded
with laundry.
•
Select the appropriate
programme for the dirtiness of
the laundry. See page 21
•
Adjust the amount of detergent
based on the dirt level of the
laundry.
•
Load the washing machine with
the correct amount and weight
and do not exceed maximum
laundry capacity.
