10
If the kettle has boiled dry the safety cut-out will have operated (see paragraph
above)
If the water has a plastic taste:
Generally this only occurs after the first use, and is not a problem if the water
boiled on the initial use is discarded as recommended in the section „Using Your
Kettle‟. If the problem persists, fill the kettle to the MAX level, and add 2
teaspoons of bicarbonate of soda. Boil and discard the water.
If the kettle forms scale inside and/or water turns cloudy:
If you live in hard water area this is normal, and is caused by calcium and
magnesium carbonates in the water, and therefore regular descaling will be
essential.
If you wish to find out more about the type of water in your area, your local water
company can give you advice.
Should the supply cord get damaged, it must be replaced by the manufacturer or its
service agents in order to avoid a hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Service Centre.
Servicing outside the warranty period is still available but this will be chargeable.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:
You have followed the instructions correctly
That the unit has been wired correctly and that the wall socket is switched on.
