BEFORE FIRST USE
Before using your appliance for the first time take it out of the box and take off any
protective wrappings. REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING
AROUND, AS IT COULD BE DANGEROUS AROUND INFANTS. Wash the b o w l , jug,
lid and cap in warm soapy water, rinse well and dry. NOTE: The blades are sharp,
handle with care.
OPERATING INSTRUCTIONS
SWITCH ON
Place the motor unit on a dry, firm, level surface, near a power socket.
Check that the speed control is set to 0.
Put the plug into the power socket.
SPEED CONTROL
Turn the speed control to the speed you want (1 = low, 2 = high). Turn the speed
control back to 0 to turn the motor off.
Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest
longer timings and slower speeds.
Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings
and higher speeds.
Do not run the motor for more than 1 minute, or it may overheat. After 1 minute, switch
off for at least 2 minutes, to let the motor cool.
PULSE
Turning the speed control anti-clockwise will give you a short burst at high speed. In
this direction, the knob is spring-loaded. When you let go, it will return to 0.
USING THE BLENDER
Align the “arrow” on the bottom of the blender jug with the “open lock” on the motor
unit.
Lower the jug onto the motor body, then turn the jug to align the “arrow” with the
“closed lock”.
Pull the lever to open the lid.
Put the ingredients into the jug.
