5
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You must
first heat the water to the desired temperature see HEATING WATER TO A SELECTED
TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note:
When using the infuser, only fill your kettle to the 1.5L marking. This will allow room for
the infuser and its contents when you insert it into the kettle, and prevent water from being
displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser into your
kettle. The opening in the infuser should face the handle.
3. Tap the icon.
4. Turn the select/confirm knob until the desired steeping time is shown on the numerical
display. Turning the control slowly will increase/decrease the time in 1 minute intervals.
Turning the control quickly will increase/decrease the time in 5 minute intervals.
5. Press the select/confirm knob . The last used temperature will then be displayed.
6. Turn the select/confirm knob to adjust desired temperature (or skip this step if the current
temperature is already correct).
7. Press the select/confirm knob to start the countdown.
8.
Your kettle will beep when the time is up. Note that the infusion will start to cool down
naturally after the timer has elapsed.
9. To cancel at any time you can tap the cancel icon.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
