4
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Fit the spindle to the top of the motor unit.
3. Sit the jug on the motor unit, with the handle to the right of the controls.
4. Turn the jug clockwise to bring the handle between the controls.
FIT THE ACCESSORY
To process, fit the chopper over the pillar in the centre of the jug and turn it anti-clockwise to
lock it in place.
To remove the chopper, turn it clockwise, and lift it out of the jug.
To grate or slice:
1. Lower the disc over the top of the spindle.
2. To slice, the slicing blade must be on top of the disc.
3. To grate, the slicing blade must be on the bottom of the disc.
FIT THE LID
1. Hold the lid over the jug, with the safety switch to the right of the handle.
2. Lower the lid on to the jug.
3. Turn the lid clockwise to bring the safety switch into the gap at the top of the handle.
4. The controls will only operate with the lid and jug in this position.
5. The jug will not move while the safety switch is engaged.
6. To release the jug, you must first turn the lid to bring the safety switch to the right of the
handle.
THE CONTROLS
O
/
I
Press the left hand button to cancel continuous running, and to pulse the motor (run in
bursts) – press I to start the motor, release it to stop.
USING THE CHOPPER
You may use continuous running (
I
) or pulse (
0
/
I
).
Continuous running is easier, if you have to add ingredients one after another.
Pulse gives better control over what is happening inside the jug.
To add ingredients while the motor is running:
1. Lift the pusher out of the tube.
2. Add the ingredients via the tube.
3. Replace the pusher.
•
If you’re using just liquids, don’t fill the jug past the MAX LIQUID LEVEL mark.
•
If you’re using solids, or a mixture of liquids and solids, don’t fill the jug past the MAX FOOD
LEVEL mark.
