5
TROUBLESHOOTING
Problem
Cause
Solution
All lights flashing
Blender has overheated
Unplug and allow to cool for 20
minutes
Button has been held for more
than 30 seconds
Unplug the unit to reset it
Blender stops and goes into
standby
Blending time exceeds 2½
minutes
Reselect an appropriate speed to
start the blender
CARE AND MAINTENANCE
1.
Switch the appliance off and unplug it.
2.
Wipe the outside of the motor unit with a clean damp cloth.
3.
Wash all removable parts in warm soapy water, rinse well, drain, and air dry.
`
You may wash these parts in a dishwasher.
•
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes.
•
The damage should be cosmetic only, and should not affect the operation of the appliance.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances, appliances
and rechargeable and non-rechargeable batteries marked with one of these symbols
must not be disposed of with unsorted municipal waste. Always dispose of electrical
and electronic products and, where applicable, rechargeable and non-rechargeable
batteries, at an appropriate official recycling/collection point.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
