manualshive.com logo in svg

Russell Hobbs 21501-56, Instructions And Warranty, Page: 3 / 9

Share
Download
Russell Hobbs 21501-56 Instructions And Warranty Download Page 3

 

3 

8.  Do not use the appliance if it has been dropped or damaged in any way. In case 

of damage, take the unit in for examination and/or repair by an authorised service 

agent. 

9.  To reduce the risk of electric shock, do not immerse or expose the motor 

assembly, plug or the power cord to water or any other liquid. 

10. Never immerse the unit in water or any other liquid for cleaning purposes. 

11. Remove the plug from the socket by gripping the plug. Do not pull on the cord to 

disconnect the appliance from the mains. Always unplug the unit when not in 

use, before cleaning or when adding or removing parts. 

12. The use of accessory attachments that are not recommended or supplied by the 

manufacturer may result in injuries, fire or electric shock. 

13. A short cord is provided to reduce the hazards resulting from becoming 

entangled in or tripping over a longer cord.  

14. Do not let the cord hang over the edge of a table or counter. Ensure that the cord 

is not in a position where it can be pulled on inadvertently. 

15. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas 

or electric burner or in a heated oven. 

16. Do not use the appliance on a gas or electric cooking top or over or near an open 

flame. 

17. Use of an extension cord with this appliance is not recommended. However, if it 

is necessary to use an extension lead, ensure that the lead is suited to the power 

consumption of the appliance to avoid overheating of the extension cord, 

appliance or plug point. Do not place the extension cord in a position where it can 

be pulled on by children or animals or tripped over. 

18. This appliance is not suitable for outdoor use. Do not use this appliance for 

anything other than its intended use. 

19. DO NOT carry the appliance by the power cord. 

20. Do not leave this appliance unattended during use. Always unplug the unit when 

not in use or before cleaning. 

21. Always operate the appliance on a smooth, even, stable surface. Do not place 

the unit on a hot surface. 

22. 

Ensure that the switch is in the “Off” position after each use. 

Summary of Contents for 21501-56










Reviews:

No comments