10
Disposal of old oil
•
Never pour old oil down the sink or toilet. This can cause blockages.
•
Don’t put it in the wheelie bin.
•
Your Local Authority will have a depot where old oil can be taken for recycling or
environmentally friendly disposal.
THERMAL SAFETY CUT-OUT
The cut-out operates to protect the element from overheating. If the fryer stops working:
1.
Switch off, unplug, and let the fryer cool down.
2. Check the oil level.
3. If the oil level is below the MIN mark, reset the thermal safety cut-out.
4.
If the oil level isn’t too low, and the thermal safety cut-out has operated for some other
reason, ring Customer Service Department.
To reset the thermal safety cut-out
1.
Find the reset button access hole. It’s marked
g
on the rear of the power unit.
2. Inside the hole you’ll see a round button.
3. Use the reset tool to press the button and reset the cut-out.
4.
If you have lost the reset tool, you may purchase a replacement from Customer Service (see
back page)
5. Top up the oil, plug the fryer in and switch on.
6. It should now work – if it doesn’t, ring Customer Service.
STORING
•
If you’re storing the fryer without removing the oil, then it’s impractical to fold the handle
into the basket.
•
You may remove the handle altogether by pushing it forward, then squeezing the uprights
till their ends come out of the clips.
•
Fit the lid on top of the bowl to keep dust, etc. out of the oil.
Summary of Contents for 19771
Page 2: ...2 g e f g i j k m l n o r s t u v w w H B ...
Page 11: ...11 ...
