Russell Hobbs 18990, Instructions And Warranty

Page: 8 / 10

Care and Maintenance

Unplug the blender from the mains before cleaning and storing away.

Clean soon after use, to prevent residues settling inside the jug.

Remove the jug from the motor unit. Wash the jug, sieve, lid and cap in warm soapy
water, rinse well, then turn the jug upside down to drain and dry.

Keep hands out of the jug
– BLADES ARE VERY SHARP.

If it is left for too long without cleaning and bits have glued themselves to the
inside of the jug, use a nylon brush to remove. If this does not work
– crush a few
ice cubes in it.

It is not recommended to put the jug, lid or cap into the d ishwasher as this can
affect the surface finishes. Do not use harsh or abrasive cleaning agents or
solvents.

Wipe the outside of the motor unit with a clean damp cloth.

Do not put the motor unit in water or any other liquid.
Servicing the Appliance
There are no user serviceable parts in this appliance. If the unit is not operating correctly,
please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Home of Living Brands