4
weighing
14 Put the item to be weighed in the centre of the scale.
15 The display will change, then stabilise to show the correct weight.
tare
16 Press
T
to zero the display, so you can weigh the next ingredient.
17 Use this function to deduct the weight of the container, or the
weight of existing ingredients:
a) Put the bowl on the scale.
b) Wait till its weight is displayed.
c) Press
T
– wait till the display stabilises at zero.
d) Add the first ingredient, and wait till its weight is displayed.
e) Press
T
– wait till the display stabilises at zero.
f) Add the next ingredient, and wait till its weight is displayed.
g) Press
T
– wait till the display stabilises at zero.
h) Repeat till you’ve weighed all the ingredients.
19 The scale is limited to 5kg. If you exceed this weight, the display
will show “
0-Ld
”.
switching off
21 After a few seconds of inactivity, the display will darken.
22 It’ll wake up when you put something on it.
23 After about 2 minutes of inactivity, it’ll switch itself off.
24 To switch it on again, press
T
.
care and maintenance
25 Clean the outside surfaces of the scale with a damp cloth.
26 Don’t use harsh or abrasive cleaning agents, solvents, scourers,
wire wool, or soap pads.
27 Don’t put the scale in water or any other liquid.
battery care
28 Don’t leave dead batteries in the scale, they may leak caustic
gunge over the product and surroundings.
29 Unless you’re using the scale regularly, it’s best to remove the
batteries altogether.
30 When you need new batteries, change them all. Don’t use new
and used batteries together.
Summary of Contents for 14971
Page 1: ...instructions ...
Page 2: ...2 ...
