5
vertical steaming
39 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
40 Check that there’s adequate ventilation behind the fabric, otherwise moisture may
build up, causing mildew.
41 Check that there’s nothing behind the fabric that may be damaged by the steam.
42 Check that pockets, turn-ups, and cuffs are empty.
43 Check that there’s water in the reservoir.
44 Turn the temperature control to
max
, move the steam control to
S
.
45 Hold the iron close to (but not touching) the fabric.
46 Press the
S
button (you’re using the “shot of steam” function
vertically).
47 You may have to press it 2 or 3 times to pump water through the system.
48 Leave 4 seconds between shots, to let the temperature build up.
after use
49 Turn the temperature control to
•
, move the steam control to
S
.
50 Unplug the iron.
51 Lift the bottom of the water inlet cover to open it.
52 Hold the iron over a sink, turn it upside down, and drain the water
from the reservoir.
caution
the water may be hot
53 Sit the iron on its heel.
54 Leave it to cool down completely.
55 When it’s cold, wipe off any moisture, and close the water inlet cover.
56 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
self clean
57 To prevent scale building up, use the self clean function regularly, at least monthly in
normal water areas, more often in hard water areas.
58 You’ll need a basin or a large bowl to catch the water coming
out of the soleplate.
59 Fill the reservoir to the
max
mark.
60 Turn the temperature control to
max
, move the steam control
to
S
.
61 Sit the iron on its heel.
62 Put the plug into the power socket, and wait till the
thermostat light goes out.
63 Now hold the iron over the basin or bowl, with the soleplate down (#9).
64 Move the steam control to
C
, hold it there, and gently move the iron to and fro,
over the basin or bowl.
caution
keep clear of the escaping water and steam
65 Water and steam will wash scale and dust through the soleplate, and into the sink.
66 When the reservoir is empty, release the self clean button.
67 Unplug the iron, and sit it on its heel to cool.
68 When it’s cold, wipe off any moisture.
69 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
Summary of Contents for 14733
Page 1: ...instructions...
Page 7: ...7...
