RUSH MH 3 Beam User Manual
31
4. Lift the lamp out of its recess.
5. Disconnect the lamp and connect the replacement lamp. Use only a lamp
that is approved by Martin™.
6. Place the new lamp into the lamp recess.
7. See illustration below. Adjust the lamp using a slotted (flat head)
screwdriver until it is centralized.
8. Reinstall the fan and secure it.
9. Replace and secure the head covers before reapplying power.
10. Reset the lamp hour counter using the control panel.
Replacing the primary fuse
If the fixture is completely dead, the fixture’s primary fuse F1 may have blown
and it may be necessary to install a new fuse. This fuse is located in a
fuseholder next to the power ON/OFF switch on the connections panel. See
‘Fixture overview’ on page 15.
If you need to replace a fuse:
Disconnect the fixture from power and allow it to cool for at least 10 minutes.
1. Unscrew the cap of the fuseholder and remove the fuse. Replace with a
fuse of the same size and rating only.
2. Reinstall the fuseholder cap before reapplying power.