Connection diagrams
To reduce the interference effect on the Wiegand line, the UTP 4x2x0.52 cable type
is recommended.
When the terminal is powered from an external power supply, it is recommended to
use a cable with a cross-section not thinner than ШВВП (flat copper two-core cable
with PVC insulation) 2x1.5 or analog. After turning on the terminal, make sure that the
voltage is 12-12.2V. In case the voltage is less, increase it at the power supply or use
a cable with a larger cross-section.
Do not forget to connect the terminals to the Ethernet network and configure
the network parameters (see Configuring network parameters).
