EN
16
HEIGHTING THE CUTTING HEIGHT
NOTE:
Your machine is sent with the cutting height to the lower position. Adjust the
cutting height as follows.
The height adjustment lever is located above the right rear wheel. To adjust the cutting
height, drive the lever outwards and maneuver it forward or backward by step.
NOTE:
For uneven or unstable terrain, move the cutting height to a higher position.
9. MAINTENANCE
Careful:
Rest assured that you have disconnected the spark plug before
performing repairs or maintenance.
NOTE:
When turning the lawn mower over, empty the tank. Do not turn the mower more
than 90 degrees in any direction and do not leave the machine upside down for long
periods of time. The oil can drain to the top of the engine and can cause starting problems.
⚫
Change the engine oil after the first 5 hours of operation, this being the running-in
period, then every 25 hours of operation or every 6 months. Read and follow the
instructions carefully.
⚫
Check the air filter after 25 hours under normal conditions. Clean it every two hours
in dusty conditions. Low engine efficiency indicates that the air filter must be
small
big
Summary of Contents for RXM777
Page 1: ...RO MAȘINA DE TUNS GAZON RURIS RXM777 ...
Page 9: ...9 3 Montați roțile ...
Page 26: ...EN LAWN MOWER RURIS RXM777 ...
Page 34: ...EN 9 3 Mount the wheels ...
