EN
15
7. MAINTENANCE
Keep all nuts and screws tight to ensure that the equipment is in safe operation.
Frequently check the waste collector for wear or damage.
Always allow the machine to cool before storage.
Replace worn or damaged parts for safety. Use only original spare parts and accessories.
When the machine is turned off for service, inspection or storage or to change an
accessory, turn off the power supply, disconnect the machine from any form of power
supply, and make sure all moving parts are turned off completely. Allow the machine to
cool before making any inspections, adjustments, etc.
Do not store the machine out of the reach of children.
8. STARTING
Couples to the power source.
Press safety 2, keeping it pressed triggers the ON / OFF switch
The following table shows the types of problems and indicates how you can correct them,
if the machine is not working properly. If, despite this, you are unable to locate the
problem and resolve it, contact an authorized RURIS service
Caution: Before starting the troubleshooting, turn off the machine and disconnect
the plug.
