2
Introduction
2.1
Purpose
The purpose of this document is to provide physical and technical data of the device, to explain device’s
behavior and how various conditions are indicated. Device preparation for the operation and its
configuration instructions are included as well.
2.2
Acronyms
PC – Personal Computer;
GPRS – General Packet Radio Service;
GPS – Global Positioning System;
GSM – Global System for Mobile Communications;
GLONASS – Global Navigation Satellite System;
GNSS – Global Navigation Satellite System;
SMS – Short Message Service;
AC / DC – Alternating Current/Direct Current;
PCB – Printed Circuit Board;
LED – Light Emitting Diode;
I / O – Inputs / Outputs;
2G – second generation of mobile telecommunications technology;
3G – third generation of mobile telecommunications technology;
UMTS – Universal Mobile Telecommunications System;
BT - Bluetooth
2.3
Legal information
Copyright © 2016 Ruptela. All rights reserved. Reproduction, transfer, distribution or storage of parts or all
of the contents in this document in any form without the prior written permission of Ruptela is prohibited.
Other products and company names mentioned in this document are trademarks or trade names of their
respective owners.
2.4
Safety
All the associated (additional) equipment such as PC’s, batteries, sensors etc., shall meet the
requirements of standard EN60950-1.
Do not disassemble the terminal. If the enclosure of the terminal is damaged, or the insulation of
wires is damaged, first of all disconnect power supply cables from power supply source.
All of the wireless data transferring equipment produces interference that may affect other
devices, which are placed nearby.
The terminal can be installed or dismounted only by qualified personnel!
The terminal must be firmly fastened in the predefined location. Predefined location is described
in the mounting instructions.
The programming must be performed using a 2
nd
safety class PCs (with an autonomic power
supply).
Summary of Contents for FM-Pro 4 BT
Page 1: ......