36
Then, decide which conditions you wish to use for engine state detection.
DIN1/DIN2/DIN3/DIN4 If ticked, the condition is true when the configured DIN detects a constant input
voltage.
Default value: DIN4 enabled, other inputs disabled
Movement sensor
If ticked, the condition is true after detecting movement.
Default value: Enabled
CAN ignition
If ticked, the condition is true if the engine on state is provided by CAN data.
Active only when at least one CAN interface is turned on.
Default value: Disabled, inactive
Power supply voltage
>
If ticked, the condition is true if the power supply voltage is greater than the
entered value (in mV).
Default value: Disabled
RPM >
If ticked, the condition is true if the RPM value provided by CAN data is greater
than the entered value. Active only when at least one CAN interface is turned on.
Default value: Disabled, inactive
