RMP-D8 Gain Compensation
The RMP-D8 has an available Gain Compensation (GC) mode that can be engaged on a channel by channel basis.
RMP-D8 channels 1 through 8 are successively mirrored to RMP-D8 Dante Transmit channels 9 through 16 in Dante Con-
troller. These mirrored outputs appear in Dante Controller on channels 9-16 identified as ‘RMP-D8 Channel 1 GC Output’
through ‘RMP-D8 Channel 8 GC Output’ and are output at an audio level which is pre-set to be 6dB below the set gain
on each channel. This -6dB offset provides additional digital signal headroom to avoid clipping the gain compensated
outputs. These mirrored channels can then be utilized as gain compensated outputs on a channel by channel basis by
activating GC, once the desired nominal gain for each channel is set:
RMP-D8 Channel 1 Dante Transmit Channel 9, (RMP-D8 Channel 1 GC Output)
RMP-D8 Channel 2 Dante Transmit Channel 10, (RMP-D8 Channel 2 GC Output)
RMP-D8 Channel 3 Dante Transmit Channel 11, (RMP-D8 Channel 3 GC Output)
RMP-D8 Channel 4 Dante Transmit Channel 12, (RMP-D8 Channel 4 GC Output)
RMP-D8 Channel 5 Dante Transmit Channel 13, (RMP-D8 Channel 5 GC Output)
RMP-D8 Channel 6 Dante Transmit Channel 14, (RMP-D8 Channel 6 GC Output)
RMP-D8 Channel 7 Dante Transmit Channel 15, (RMP-D8 Channel 7 GC Output)
RMP-D8 Channel 8 Dante Transmit Channel 16, (RMP-D8 Channel 8 GC Output)
Setup:
Before entering gain compensation mode, adjust each channel’s gain to the desired nominal gain level for the given
input signal. Enter gain compensation mode by PRESSING and HOLDING the channel select button on the desired
channel or by toggling the function on the remote user interface. Once gain compensation is engaged, the correspond-
ing mirrored Dante Transmit channel will maintain a consistent level, compensated within a range of +/- 12dB of the
primary channel being adjusted.
Gain
Compensation
Channel
1
Engaged
10
P+
+36dB
Channel 1
GC
