39
Then press "On", to activate „Lap-To-Waypoint” function.
Then select one of the paths. This path will be erased and replaced with
a new reference point
Setting of measurement interval
The GPS watch records the path continuously. You can set manually how
often the measurements are performed, from 1 second up to 10 minutes.
The basic setting is 4 seconds:
In the setting mode select „Workout” point
„Tracklog“.
Then adjust the interval desired for measurements
6.3.4
After training
Setting of training data to zero
If training stops, hold down the "LAP/RESET" button, until "Hold to Save"
appears; all training data are set to 0 and you can start with a new training.
Still, the data of this training will be kept in the memory of the watch and will
be able to be viewed later.
Deletion of training data
If you wish to delete the data of the last training:
In the setting mode select „Workout” point
„Delete”
„Del Last”.
If you want to delete the data of all trainings so far:
In the setting mode select „Workout” point
„Delete”
„Del All”.
Training history:
In the setting mode select „Workout” point from the menu
„History” to view a training history.
The history consists of 3 parts, if each part is displayed for each 5 seconds
(automatic switch between the parts).
