V2.0
RUNGU Electric Juggernaut Owner Manual
–
2019 model year
Copyright 2019 Standard Bearer Machines, LLC
64
AND YOU START BY GOING UP HILL OR THROUGH SOFT TERRAIN, THE COMPUTER ESTIMATES A VERY
SHORT RANGE; THE COMPUTER ASSUMES YOUR ROUTE TO CONTINUE TO LOAD THE BATTERY IN THE
SAME WAY. IF YOUR ROUTE BEGINS ON A LONG DOWNHILL; THE COMPUTER ASSUMES CONTINUED
LIGHT LOADING AND ESTIMATES A VERY LONG RANGE.
Accessing the display settings
To access the display settings, press the “I” button twice
in succession within two seconds. The screen
shows three settings: Display Setting, Information, and Exit. Naviga
te the list using the “+” and “
-
“ keys;
use the “I” key to make a selection. The Display Setting item has multiple settings that are fully
described in the
“
Rungu Electric Juggernaut Mid-drive Version Display User Guide
”
manual you can find
in your USB document drive or on line at this link.
Toggling the (optional) Rungu E-Light on and off
If you have the Rungu E-Light with your Electric Juggernaut, the Rungu E-Light toggle turns the light on
and off. Press and hold the Rungu E-Light toggle for two seconds and release to turn the light on. Do
the same to turn it off. The screen will dim when you turn the light on for nighttime visibility.
Choose the AL Sensitivity setting in Display Settings, to have the light turn on automatically in low light
environment. The option has five levels of sensitivity so that the light sensor in the display will decide
when to turn on the light based on surrounding light levels.
Turning off Electric Juggernaut
Use the on/off key to turn off Electric Juggernaut. Electric Juggernaut also turns off if left idle for a few
minutes. Display settings control the amount of time in minutes.
