V2.3
RUNGU Juggernaut User Manual
–
2020 model year
Copyright 2017 Standard Bearer Machines, LLC
19
31.
Inflate each tire between 5 and 10 PSI (34 to 69 KPa). See the section
Inflating Tires
–
using
Presta valve adapter
s for directions.
Note: Tire pressure plays an especially important role in how you enjoy your Rungu Juggernaut. If you
plan to ride mostly on soft ground like sand or snow, use a tire pressure of 5 (34 kPa) for best traction
and control as well as minimizing tread wear. Use 10 PSI (69 kPa) if you plan to ride on harder
surfaces like rock or dirt road. On harder surfaces, a higher pressure minimizes tread wear and
improves the range of your Juggernaut.
CAUTION: AVOID UNDERINFLATING AND OVER INFLATING THE TIRES. UNDER INFLATION (BELOW 5
PSI) MAY PREVENT THE TIRE FROM SEATING ON THE RIM AND PREVENT YOU FROM RIDING
JUGGERNAUT. OVER INFLATION (MORE THAN 15 PSI
–
103 KPA) MAY RESULT IN TIRE BLOW-OUT
WHILE RIDING.
32.
Loosen the Seat Post Clamp by opening the lever. Insert the seat post and adjust to the height
that suits you, then tighten the clamp by closing the lever.
Note: Failure to tighten the seat post can result in discomfort or injury while riding Juggernaut.
WARNING: DO NOT EXTEND THE SEAT POST BEYOND THE MAXIMUM HEIGHT LIMIT BEFORE
CLAMPING. THIS CAN RESULT IN THE SEAT POST BREAKING AND SEVERE INJURY OR DEATH.
33.
If the package you purchased includes optional mud flaps (Steep, Rugged, Rubicon Trail Edition)
or the Rungu Cargo Rack with the range-extending battery, continue to the Additional
Instructions for installation. If you have purchased (or you also have) the Rungu Cargo Rack,
please refer to the Rungu Cargo Rack installation instructions for assembly.
34.
Remove the remainder of the packing materials.
