Operation
26
Runco VX-2i Owner’s Operating Manual
4.3
Lens Adjustments
To access the motorized lens controls, select Display Device from the Service Menu, then
select Lens from the Display Device menu. The Lens menu gives you a great deal of
control over the picture size, position and focus:
Focus
To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then,
press and hold the
ENTER
button.
Zoom
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
(-). Then, press and hold the
ENTER
button.
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).
Then, press and hold the
ENTER
button.
Shift
To change the projected image position, use the cursor buttons to highlight “Left,”
“Right,” “Up” or “Down.” Then, press and hold the ENTER button to shift the image in that
direction.
4.4
Using the On-Screen
Menus
Press the
MENU
button on either the remote control or the rear panel to display the Main
Menu, shown below. To select a menu item, use the UP and DOWN buttons on either the
remote control or the rear panel to highlight it. Press
ENTER
to confirm your selection.
The VX-2i OSD menus are arranged hierarchically, as shown in Figure 4-1.
➤
➤
➤
