Runco Video Xtreme VX-2c, Owner'S Operating Manual

Page: 53 / 84

Operation
Runco VX-2c/VX-2dc Owner’s Operating Manual 41
PRE
L
IMINAR
Y
Picture Use the controls in the Picture Menu to calibrate your VX-2 for optimum picture quality.
The VX-2 has been designed to incorporate setup and calibration standards established
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Runco video display devices. Accordingly, Runco recommends that
setup and calibration be performed by an ISF certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately. Runco recommends calibrating the VX-2 inputs in the following order:
1. Component SD
2. S-Video 1 / S-Video 2
3. Composite
4. HD/RGB 1 / HD/RGB 2
5. DVI 1 / DVI 2
Virtualwide 2.35 SVC A 2.35 image is stretched
anamorphically in both
directions to fill a 16:9 image.
(The secondary anamorphic lens
then “stretches” the image back
to 2.35:1.)
Virtualwide 2.35 is available only
on VX-2 projectors equipped
with the CineWide option.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
VirtualWide 2.35
2.35:1 Image on
2.35:1 Screen with
VirtualWide 2.35
Picture
Brightness
Contrast
Color
Tint
Sharpness
When you change a picture quality setting, save the change to a
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input and resolution separately.) For information about saving
settings, refer to
ISF Presets
on page 46.
Note