
VX-3000 Installation/Operation Manual
77
PRE
L
IMINAR
Y
6.1
RS-232 Connection
and Port Configuration
To interface the VX-3000 with a home theater automation/control system or a PC running
terminal emulation software:
1. Connect it to your control system or PC as shown in Figure 3-17.
2. Start a terminal session on your PC using a terminal-emulation program, such as
HyperTerminal.
3. Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1
stop bit and no flow control. Set the baud rate to 19200.
4. Type a command from among those listed in Table 6-1. For example, to select the
Component 1 input, type
X133X
.
Do not send a carriage return after the
command.
6.2
Serial Command
Syntax
Serial commands to the VX-3000 take the following form:
• Commands are in ASCII format.
• Commands must be in
UPPERCASE
; for example,
X001X
,
not
x001x
.
• When you send a valid command, the VX-3000 performs the following actions:
1. Echoes the command back to the PC or control system, unless the command is
X001X
(Power On).
2. Executes the command.
3. Sends a confirmation message in the form
X0_
[command number]
X<CR>
. The
confirmation message does not include the leading zeros in the command.
For example, when you send the command
X003X
, the VX-3000 responds with
X003XX0_3X<CR>
. When you send the command
X061X
, the VX-3000 responds
with
X061XX0_61X<CR>
. When you send the command
X133X
, the VX-3000
responds with
X133XX0_133X<CR>
.
• When you enter an invalid command, the VX-3000 echoes the command and does
nothing else.
6. Serial Communications
The VX-3000 will not accept serial commands for 20 seconds after
it is turned on or off.
Table 6-1. Serial Commands: X Command (Write Only)
Code
Function
0x06, 0x14,
0x00, 0x03,
0x00, 0x34,
0x11, 0x00, 0x5c
Power on
X001X
Serial command test action
X002X
Power off
Note
Summary of Contents for Video Xtreme CineWide VX-3000d
