Runco Q-750i Series, Installation And Operation Manual

Page: 82 / 108

Operation
66 Q-750i Series Installation/Operation Manual
PRE
L
IMINAR
Y
Control Select Control from the Main Menu to set various options related to control of the
projector.
HD 1 Key / HD 2 Key / HD 3 Key: These menu items assign the function of the HD 1,
HD 2 and HD 3 buttons on the remote.
There are eight sources corresponding to the eight connections to the projector. When
you assign a source to a numbered key, the projector immediately goes to that source
when the key assigned to it is pressed.
If the chosen source is disabled via the Input Enable menu (refer to page page 62), this
setting has no effect.
CineWide: Select CineWide from the Control menu and set it according to the installed
lens configuration, as follows:
• For a standard Q-750i (no anamorphic lens), choose Off .
• For a Q-750i/CineWide (fixed anamorphic lens), choose CineWide .
• For a Q-750i/CineWide with AutoScope (motorized anamorphic lens), choose
AutoScope .
➤