Runco DTV-940, Owner'S Operating Manual

Page: 17 / 73

3-5
Connecting a Component source.
(R-Y)Y(B-Y) analog input terminals with sync input or
with sync on the luminance (Y) input. The projector detects
automatically where the sync signal is located.
(R-Y)Y(B-Y)S or (R-Y)Ys(B-Y) input selection
a. With the RCU: Select “Component” in the Source Selec-
tion Menu
b. With the local keypad :
(to gain access to the local keypad, see ‘Local key-
pad’in chapter ‘Location and function of controls’.)
-Press
ADJUST key, the General access menu is dis -
played on the screen.
-Use the control disk to highlight
5 .
-Press ENTER to select the highlighted source.
Connecting a Component source with Tri-level sync.
(R-Y)Y(B-Y) analog input terminals with Tri-level
sync input or with Tri-level sync on the luminance
input.