Runco DLC-2000HD, Installation Manual

Page: 26 / 33

24
COMMAND PARAMETER
(min/max)
Value stored? DESCRIPTION
ON NA NA Turns Controller on
OFF NA NA Turns Controller off
COMPOSITE NA YES Selects Composite Video input
SVIDEO NA YES Selects S-Video input
COMPONENT NA YES Selects Component Video input
HDCOMPONENT NA YES Selects Component HDTV input
RGB HDTV NA YES Selects RGB HDTV input
ANAMORPHIC NA YES Selects Anamorphic aspect ratio
STANDARD NA YES Selects Standard(4:3) aspect ratio
LETTERBOX NA YES Selects Letterbox aspect ratio
TINT -127/127 NO Sets a value for tint
COLOR -127/127 NO Sets a value for color
AGCCOLOR 0/1 NO 0=Disable Color AGC
1=Enable Color AGC
BRIGHTNESS 0/63 NO Sets a value for brightness
CONTRAST 0/63 NO Sets a value for contrast
AGCCONTRAST 0/1 NO 0=Disable Contrast AGC
1=Enable Contrast AGC
SHARPNESS 0/255 NO Sets a value for sharpness
CHROMAHIGH 0/127 NO Sets a value for high-frequency
chroma edge enhancement
CHROMALOW 0/127 NO Sets a value for low-frequency
chroma edge enhancement
LUMAHIGH 0/127 NO Sets a value for high-frequency
luminance edge enhancement
LUMALOW 0/127 NO Sets a value for low-frequency
luminance edge enhancement
RGAIN 0/63 NO Adjusts the amount of RED in
the image
GGAIN 0/63 NO Adjusts the amount of GREEN in
the image
BGAIN 0/63 NO Adjusts the amount of BLUE in
the image
RS-232 Commands